KERN & SOHN KET-TM - Manual (Page 88)

88 KEN-TM / KET_TM-BA-e-1420
9.2 Dispensing
 Place and tare full container.
 Remove portions of components and save them at the same time to the
alibi memory (Depends on menu setting in storage module), see chap.
9.1). The displayed minus figures are saved to the alibi memory as plus
figures.
 Under the menu item
<Reports>

<Reports from weighing records>

<Weighings / Alibi>
the saved weighing values can be seen, see chap. 9.1.
Tap
< Dispensing >.
Weighing scale is working in
default weighing mode
Weighing scale is working in
mode
“Differential Weighing“