Kuzma Stogi Reference - Manual (Page 24)

_________________________________________________________________
STOGI/STOGI REFERENCE 24 KUZMA
VII. TRANSPORT AND PACKING
A. With tonearm on Turntable
The tonearm can be left on the turntable when being transported short distance by.
1. Placing tonearm in armrest.
2. Securing arm to armrest with elastic band or tape.
3. By removing counterweight and
4. Securing movement of subchassis by insertion of wedges.
Many turntables, however, cannot be properly packed for longer transport with the tonearm
in position and the tonearm, therefore, must be removed and repacked in original packing.
B. Packing (Fig. 29)
If desired, cartridge can be left in place but a suitable cut will have to be made in polystyrene
packing.
1. Remove counterweight and put in plastic bag in slot.
2. Fold cable so it is shorter than the tube and tie together.
3. Put cueing device in down position.
4. Holding by pillar, place tonearm into plastic bag taking care of bias.
5. Fit tonearm into polystyrene cut-out.
6. Replace securing insert and put two halves of packing together.
7. Secure and replace in box and sleeve.