LABEC AA-12BS - Manual (Page 19)

Operation manual
Series Steam Sterilizers
15
9. Maintenance & Maintain
9.1 How to clean the water tank.
9.1.1 Please clean the sterilizer water tank and waste
water tank regularly.
1 Empty the tanks water, please refer to item 9.2 draining the water.
2 Open the tank cover board, you can use screw driver to loose the
five screws just as fig9-1 indication
3 Pull up the water tank cover board by one hand,just, as
fig9-2 indication.
4 Pull up the tank cover completely and you can disassembly the
tank cover. See fig9-3 indication.
5 Now you can start to clean the tank, use cotton to dip in some
alcohol or medical disinfectant to scour the tank wall,wash it by
distilled water, then empty the tank and dry the tank.
6) After you cleaning the tank, assembly the tank cover and tighten
the screws.
Fig9 -1
Fig9 -2
Fig9 -3
Fig 9-4
9.2 Draining of water from the machine Drain the condenser water collector and water reservoir.
Connect the water outlet using the one end of the tube without a connector and the other end of
the tube to a drainage sink. Then turn the draining knob anti- clock wise to drain the water from
the machine.(Fig 9-4)