LABEC AA-12BS - Manual (Page 8)

Operation manual
Series Steam Sterilizers
4
Prepare the machine before use
We have installed filtration equipment in the
chamber(Fig3-3).You should clean the filtration
equipent when use the autoclavefor a long time
The instruction how to clean please refer to P16.
Before using the device, you should make electrical
connections by using the power cord that comes with
the unit. Insert the hollowed end of the power cord in
to inlet of the machine and plug the other end on a
power outlet. Caution: The power supply can afford
1800VA load. Ok, you can turn on the autocalve now.
Caution: The power supply must afford at least 1800VA load.
Tips: Before using the Autoclave, please check on the local atmospheric
pressure. If the pressure is lower than 0.095 Mpa or the Altitude is higher
than 500 meters, you will need to contact your distributor who should
reconfigure the controller in the device.
Fig 3-3
Fig 3-4