LABEC V-11D - Manual (Page 13)

- 10 -
Fig. 4-8
6) Press to print the test result.
7) Repeat step5) and step 6) to test other samples.
4. Coefficient Method
1) Turn the Wavelength Knob to set the wavelength at the point you need.
2) Press to choose“F” Mode.
3) Press or to set the coefficient value of K and B, followed with
pressed to confirm. (Fig. 4-9) Then you can test the samples as the following
steps..
Fig. 4-9
4) Pull the Reference in the light path and press to set 100%T（Fig. 4-10） ；
Fig. 4-10