LABEC V-11D - Manual (Page 9)

- 6 -
1 — LCD (128 X 64)
2 — Key Button
3. Button Description
Switch the Photometric Mode
Confirm/Print
Decrease Number/Set Zero
Increase Number/Set 100%T
Instrument Operation
1. Local Software Structure
Please see Fig. 4-1：
图 4-1
2. BASIC OPERATION
1) Select Test Mode
Press to select the test mode.
2) Set Wavelength
Turn the Wavelength Setting Knob to select the wavelength you want, the wavelength
Value can be displayed on the screen in real-time.
3) Input the Coefficient
When the system prompts you to input C, k or b, press or button to
change the value till it displays the one you want, then press to confirm.
Note: The system will memorize your last input all the time until you input another
value.
4) Calibrate Zero