Longshine LCS-US204 - Manual (Page 22)

22
physical printer on the server.
F. Then try to issue a print job to the desired printer. You will see the Control Center
will automatically do a connect operation. Then, the print job will be issued to that
printer.
G. Even you already properly setup an auto-connected printer, the Control Center
must be running (in the background) while a print job is issued. This means you’d
better run the Control Center every time after you login Windows. In order to skip
this manual operation, you can make the Control Center be run automatically
after you login Windows. To do this, choose the “Configuration” item in the “Tools”
menu. The following window will appear. Click on the check box and then on the
“OK” button. This feature is enabled by default.