Longshine LCS-US204 - Manual (Page 26)

26
You can see the storage icon in the system tray.
Then just use the new disk as a general disk. After you finish the disk operations, click
the storage icon in the system tray and choose “Safely remove USB Mass Storage
Device” to remove the USB storage, as the following figure.
Then, in the Control Center, click the USB storage device and click the “Disconnect”
button to disconnect the USB storage device.
4.9 Request to Connect
If a USB device is manually connected by any other user, basically you can not connect
that device. However, we offer another mechanism called “Request to Connect” to
solve this inconvenience. For example, there are two computers – TESTES and TEST.
Now the owner of “HP Photosmart 2600” is TEST. Then, the TESTES computer wants
to use this HP printer. The user on the TESTES computer can click the “Request to
Connect” button in the Control Center. The following window appears.