Longshine LCS-US204 - Manual (Page 39)

39
Chapter8
Restore Factory Defaults
You may restore the Server’s default parameters by one of the following methods.
8.1 Using the Server’s Web Pages
1. Go to the Server’s web page and click CONFIG
2.
Enter administrator (default: admin) and password (default: admin).
3. Click Maintenance.
4.
Click Factory Default.
5. Click Yes to confirm
8.2 Using Init Button
Plug in the power adaptor while pressing the Init button until LED indicators of USB1
and USB2 blink. After that, plug off the power adaptor and then plug in the power
adapter again to restart the Server. Finally, the Server will operate using the Factory
Default values.
8.3 Default Parameters List
General Information
Server Name: LCS-US204
TCP/IP
Automatically get IP by DHCP: Enabled