MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 10)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 9
System Startup
Before duplicating can begin, it is necessary to review a few details.
•
Plug one end of the supplied power cord into the upper receptacle at the
rear of the unit.
•
Next, verify that the voltage selector switch is set correctly. It is located
between the two power receptacles. The CD-5916 supports both 115
VAC and 230 VAC at 50 ~ 60 Hz. Please confirm that the appropriate
voltage (115 VAC for North America) has been selected.
M
CAUTION
Always use properly grounded receptacles, or severe damage to
your system may result. The use of a surge protector or
Uninterruptible Power Supply (UPS) is highly recommended.