MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 13)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 12
Operation - Quick Start
The CD-5916 is a state-of-the-art CD duplicator. It is designed to copy and
verify most standard compact disc formats. This Quick Start section will
guide you through copying and comparing discs using the CD-to-CD
method. More advanced topics, such as copying by making use of the
internal hard disk drive, will be covered later in this guide.
Making Copies (CD-to-CD)
The quickest and simplest way of duplicating one or more discs is to use the
CD-5916’s CD-to-CD copying feature. The steps are as follows:
•
From the main operating screen depicted below:
1 6 X C O P Y O R C O M P A R E
•
Load your original CD to be copied (master disc) into the top right-hand
side CD-R/RW recorder.
•
Load as many blank discs as you may require into the remaining
recorders. Wait for the LED lights on the front of all the recorders to
stop flickering (this may take up to 30 seconds).
•
Press the “COPY” key on the keypad. The screen will now read:
F R O M H D ? ( S T A R T ? S T O P )
•
Press the “STOP/NO” key. The screen will now read:
T O H D ? ( S T A R T ? S T O P )
•
Press the “STOP/NO” key. The screen will now read:
C D - > C D ? ( S T A R T ? S T O P )
•
Press the “START/YES” key to begin copying from your master disc (in
the top right-hand side recorder) to the blank discs (in the other
recorders). The master will be analyzed automatically to determine its
format type. The screen will now read in sequence:
WA I T I N G F O R D R I V E S R E A D Y