MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 23)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 22
[ 0 ] = M A X I M U M [ 4 ] = 4 x
The factory default setting is “maximum”. When selected, the Set
Archive Speed feature forces the CD-5916 to create a hard disk
image from a master disc at the chosen speed. Using 4x speed can
improve the chances of copying poorer quality master discs.
•
Press the “0” key to select “maximum” or the “4” key to select “4x”
archiving speed. After pressing either key, you will be returned to the
main operating screen.
•
From the “16x Copy or Compare” screen, press the “9” key on the
keypad.
1 : O K
2 : O K
3 : O K
4 : O K
5 : O K
6 : O K
7 : O K
8 : O K
This displays the status of the last disc copied or compared in each of
the CD-5916’s recorders. If the last operation performed was
successful, the screen will report “OK”. If problems were
encountered, an error message will be displayed (see page 63).