MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 36)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 35
Comparing From A Hard Disk Image
To ensure copied discs are identical to the originals, the CD-5916 is
equipped with powerful verification capabilities. In addition to the CD-to-
CD compare feature outlined in the Quick Start section of this guide, copied
discs can also be compared against hard disk images to ensure copying
integrity.
Note: Due to the nature of the various compact disc formats only
CD-ROM Mode 1, CD-ROM Mode 2, CD-ROM XA Mode 2
Form 1, and audio (CD-DA) discs can be compared.
Multiple Images Disabled
To compare copied discs to a hard disk image that was previously created
with the Multiple Images feature “disabled” (ie. from a single hard disk
image), the steps are as follows:
•
From the main operating screen depicted below:
1 6 X C O P Y O R C O M P A R E
•
Load the copied discs to be compared into the CD-R/RW recorders.
Wait for the LED lights on the of all the recorders to stop flickering (this
may take up to 30 seconds).
•
Press the “COMPARE” key on the keypad. The screen will now read:
C D - > C D ? ( S T A R T ? S T O P )
•
Press the “STOP/NO” key. The screen will now read:
A G A I N S T H D ? ( S T A R T ? S T O P )
•
Press the “START/YES” key. The screen will now read:
WA I T I N G F O R D R I V E S R E A D Y
Progress will be displayed on the screen during the operation: