MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 61)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 60
System Startup
•
Turn on the power to the CD-5916. Wait a minute or two while the
system starts up. The screen will now read:
M F I N C .
C D 2 C D P R O A D V A N C E D
After the startup routine is complete, a series of self-diagnostics will be
performed. The screen will now read in sequence:
S C A N N I N G H A R D D R I V E . . .
C H E C K I N G S Y S T E M . . . .
S Y S T E M O K
P L E A S E WA I T . . .
S E E K I N G S L A V E U N I T . . .
Once complete, the main operating screen is displayed on the screen:
1 6 X C O P Y O R C O M P A R E
•
Turn on the power to the PC and the computer will recognize the CD-
5916’s top right-hand side four CD-R/RW recorders as valid SCSI
devices (the remaining twelve recorders will not be recognized). Refer
to the documentation that accompanied your premastering software for
information on how to create CDs.
M
caution
The CD-5916 cannot be operated in its normal standalone mode when
attached to a PC. Do not attempt to execute any commands using the
keypad as this may lockup both the PC and the CD-5916.