MF Digital Vantage (Rev: 06/01/02) - Manual (Page 16)

Vantage Series
Operator’s Guide
Document Revision: 110102
Page 15
Location Of CD-R/RW Recorder Parts And Controls
MediaFORM SmartDRIVE 24X
Legend
1) Disc tray - Discs are loaded and removed from this tray. Pressing the eject button will open the
tray when the power to the Vantage is switched on.
2) Read and write status LEDs - These indicators light up when the recorder is reading or writing.
3) Eject button - This button is used to manually open or close the disc tray.
4) Emergency eject pinhole - In the event that the disc tray will not open by pressing the eject button
insert the tip of a large paper clip into this hole and push.