MF Digital Vantage (Rev: 06/01/02) User Manual

Page 20

Advertising
background image


Vantage Series

Operator’s Guide

Document Revision: 110102

Page 19

Making The Connection

•

Make sure the printer power switch is set to the off position.

•

Connect the supplied parallel printer cable to the printer port on the back

of the Spectrum2 and to the parallel port on the back of the host
computer.

•

Connect the supplied serial cable to the serial port on the back of the

Spectrum2 and to COM1 on the back of the host computer.

•

Connect one end of the power cord to the VAC Out on the Spectrum2

and the other to the wall power outlet.

•

Install the ribbon as shown in the Spectrum2’s documentation.


Advertising