MF Digital Vantage (Rev: 06/01/02) - Manual (Page 23)

Vantage Series
Operator’s Guide
Document Revision: 110102
Page 22
Starting The Vantage For The First Time
Before disc creation can begin it is necessary to review a few details.
Power Connection And Settings
• Make sure the Vantage power switch is set to the off position.
• Plug one end of the supplied power cord into the receptacle at the rear of
the unit, and the other end into the wall or UPS power outlet.
CAUTION CAUTION CAUTION CAUTION
Always use properly grounded receptacles, or severe damage to
your system may result. The use of a surge protector or
Uninterruptible Power Supply (UPS) is highly recommended.
Starting Up
• Flip the Vantage power switch to the on position.
• Switch on the power to the printer.
• Turn on the computer and get to the desktop.