MF Digital Vantage (Rev: 06/01/02) User Manual
Page 30
Vantage Series
Operator’s Guide
Document Revision: 110102
Page 29
CD Labels Default Folder
•
To choose a default folder for your CD labels, click the Browse button
to the right of the CD labels default folder field. When creating a new
job, this will be the default folder that the Vantage opens to browse for a
label file path.
Printer Driver
The Printer Driver pull-down is used to indicate to the Vantage the type of
printer that is installed.
•
Click the Printer Driver pull down and select the type of printer being
used.
•
If you do not have a printer, please select none.
Communication Serial Ports
The Communication Serial Ports pull-down allows you to choose which
COM port the Vantage uses to communicate with the PC.
•
To choose a COM port, click the pull-down button to the right of the
Communication serial ports field. Depending on which port the Vantage
is connected to, you will choose from COM 1, or 2.
•
Click
OK to exit the Settings Editor.
•
Close and reopen the Vantage software.