Motion Pro 11-0055 - Manual (Page 2)

I11-0055 2 10/2010
Fig. 2
4. Mark the hole position and cover with masking tape to protect the plastic during
drilling (Fig. 3). Make sure the hole placement is positioned so the button does not
interfere with or touch the fuel tank or any frame members. Drill a 12 mm (15/32) hole.
Remove tape and any rough edges to smooth hole.
5. Insert wires through hole and mount button into fender by tightening the locknut (Fig.
4 &Fig. 5).
Fig. 3 Fig. 4