New England Arbors VA84258 - Manual

Check Box for These Contents (1 Box)
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1. Posts (2) 2” x 3 1/2“ x 43”
2. Top Rail (1) 1 1/2“ x 3 1/2” x 48 1/4”
3. Bottom Rail (1) 1 1/2“ x 3 1/2” x 48 1/4”
4. Pickets (2) 7/8“ x 3” x 38 1/2“
Pickets (2) 7/8“ x 3” x 36 1/4“
Pickets (2) 7/8“ x 3” x 35“
Pickets (2) 7/8“ x 3” x 34 1/4“
5. Steel Hinge Set (1)
6. Steel Latch Gate Set (1)
Hardware Kit (Includes):
7. Self-tapping stainless Screws (16) 5/8”
(*) Gate will fit:
Nantucket Legacy, Nantucket Deluxe, Fairfield Deluxe,
Fairfield, Westchester, Newport.
(*) If gate is to be installed on a Yorkshire arbor, the top
and bottom rails will need to be trimmed by 1/2“ (1/4” off
each end)
Tools You Will Need
• Cordless Drill with #2 Phillips bit and 1/8” drill bit.
• 3/8” Socket Wrench
• Phillip Screwdriver
• 11/16” Or adjustable wrench
• Tape measure and pencil
• Square
• Level
General Information
• Read Instructions through carefully before beginning assembly.
• When handling components, place on a non-abrasive surface
(I.e. Shipping box) to avoid scratching.
• We recommend an area approx 5’x 5’ for unobstructed handling.
Cottage Picket Gate
Please read through before starting assembly.
A S S E M B LY I N S T R U C T I O N S
1
1
Ver 2/Sep 2009
7
Not to Scale
2
48 1/2”
43 3/4”
22 1/2”
6”
2”
1 7/8”
3
4
5
Not to Scale
6
Not to Scale
Picket cap comes
installed
Post cap comes
installed
Click on the image below to active the
interactive 3D model.