NORAC UC5-BC-AGCO-RMC - Manual (Page 18)

18 |
3.5. Hydraulic Retune
On occasion it is necessary to recalibrate the hydraulics of the NORAC UC5 Height Control system.
When you press the “Retune” button from the Setup screen, the system will go through only the
“Hydraulic Tuning” portion of the Automatic Setup. You may want to perform a Retune when:
 A hydraulic solenoid has been changed.
 A hydraulic pump has been changed or adjusted.
From the Setup screen, select Retune.
A list of precautions will be displayed on the terminal. It is very
important that you read these precautions and follow them.
Once you have read the precautions, select the Check button.