Boom geometry – NORAC UC5-BC-AGCO-RMC User Manual
Page 45
Advertising
45 |
4. Select the boom function. Press the “Gain" button.
5. Press and hold the automatic “A” button.
6. Hold until the boom stops moving and the reading stabilizes.
7. Continue to hold it until the display says “Test Complete”.
5.6.3. Boom Geometry
Navigate to the “Boom Movements” screen in the diagnostic menu (Run Screen-> Settings->
Next-> Next-> Diagnostics-> Boom Movements). LWSF and RWSF should be close to the same
value.
Advertising