NOYAFA NF-8108 - Manual (Page 12)

Test Result 3: Abnormal pair and length (PAIR &LENGTH) display
It will display the paired lines first if there is unpaired lines and length
(PAIR & LENGTH) measurement:
P a i r 12 100.0m
78
P a i r 36 100.3m
P a i r 45 100.2m
In which, the last line (78 ) indicates there is no pair is found in lines
7and 8, at the moment, it will display the length of unpaired line number.
It will display "X" to indicate an open circuit if the length is less than
90%of other line pair length and the open circuit is located at around
89.3M from the tester. (The open circuit line number could be
rechecked by WIREMAP function.)
At the moment, push key to go back previous picture and push key to
show further unpaired line number length.(Or push key to return the
main menu)
P i n 7 100.0m
P i n 8 89.3m x
Coaxial cable and telephone line measurement function:
After entering (Coax/Tel) function, the tester will show the test
result as follows if the cable is normal::
Coax/tel test
Pass
It shall display OPEN if there is any open circuit or the coaxial cable
is not connected. It shall display SHORT .At the moment, push
key to repeat the measurement or push key to return the main
menu.
Note: For coaxial cable measurement, it needs accessories: BNC
adaptor cable:one end is connected to “main”port,the other end is
connected to the coax cable.
PAIR&L
PAIR&L
Your excellent helper in cable test! 09