NOYAFA NF-8108 - Manual (Page 9)

Test Result 1: Short circuit (SHORT)
It displays as follows if there is any short circuit in cable or
terminal: (e.g.12 short circuit in the sample)
Short:
12
At the moment,push key to restart testing or push key to
return main menu.Always eliminate short circuit error first and then
start further measurement.
Test Result 2:
Neither remote unit (ID) nor cable inserts into local port (L) .
The tester will automatically detect remote unit and connected, it will
display as follows if the cable to be checked does not insert into the
remote unit or if the cable does not into the local(L)in local test:
No adapter:
At the moment, push key to restart testing or push key
toreturn main menu.
Test Result 3: Normal wiring diagram (WIREMAP) display
The tester will automatically detect remote unit or local port (L)cable
and it will display wiring diagram (WIREMAP) as follows if the remote
unit (ID) or the cable to be checked is found:
Wire map:pass
R: 12345678 id1
Iiiiiiii
M: 12345678
“R:" means "Remote" tester.
"M:”means "Master" tester.
At the moment, push key to restart testing or push key to
return main menu.
PAIR&L
PAIR&L
PAIR&L
Your excellent helper in cable test! 06