OFM 511-L User Manual

Sharp executive leather chair, Assembly instructions

Advertising
background image

A

Chair Seat

1 Unit

B

Chair Base

1 Unit

C

Arm Rests

2 Units

D

Casters

5 Units

E

Gas Lift

1 Unit

F

Seat Mechanism

1 Unit

I

8mm Hex Screw

4 Units

J

6mm Hex Screw

4 Units

L

6mm Washer

4 Units

M

Screw Cap

4 Units

Assembly Notes:

During assembly, hand tighten screw only when all screws

are in place, you may then tighten all screws completely.
CAUTION:

1. Do not use this chair as a step ladder.

2. Check for loose screws and tighten them every 6 months.

Model 510-L / 511-L

Sharp Executive Leather Chair

WEIGHT CAPACITY: 250 lbs.

Parts Listing

STOP

Assembly Instructions

Tools Needed: Phillips Head Screwdriver

Please read all instructions before assembly.
Step 1: Insert Casters (D) into Chair Base (B). Insert Gas Lift (E) into hole in

Chair Base (B).

Step 2: Attach Arm Rests (C) to sides of Chair Seat (A) using 8mm Screw (I).

Tighten with Allen Wrench.

Step 3: Attach Seat Mechanism (F) to the bottom of Chair Seat (A) using

6mm Screws (J) and 6mm Washers (L).

Step 4: Place chair body onto Chair Base (B) by inserting top of Gas Lift (E)

into hole in the center of Seat Mechanism (F). Press down firmly on

Chair Seat (A) to secure onto Chair Base (B).

Step 5: Cover screw holes with Screw Caps (M). Press in firmly.

919-362-4765 (fax)
www.ofminc.com

161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
[email protected]

06.09.2010

2

A

C

I

4

E

D

B

1

3

J
L

F

A

Front

5

M

Advertising
This manual is related to the following products: