OFM 335 - Manual

B
D
E
D
Stars Back(325)
1 Unit
E
Moon Back(335)
1 Unit
F
Seat Cushion
1 Unit
G
Steel Base
1 Unit
4PCS
A
2PCS
B
4PCS
C
325
335
A
F
C
G
1
Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Parts Listing
Model 325/335
Stars/Moon Stack Chair
WEIGHT CAPACITY: 250 lbs.
STOP
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
Please read all instructions before assembly.
Step 1: Attach Seat Cushion(F) to Steel Base (G) using screws (A) and washers (C).
Tighten screws with phillips head screwdriver.
Step 2: Place the plastic Back (D / E) onto top of Steel Base (G). Line up holes in
the rear of the seat back and frame and connect using two short screws (B).
Tighten screws with Phillips head screwdriver.
01.02.2014
919-362-4765 (fax)
www.ofminc.com
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
[email protected]
2