OFM 5000RE - Manual

Assembly Notes:
Hand tighten legs only.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose legs and tighten them every 6 months.
Models 5000L, 5000LE, 5000R, 5000RE
Serenity Series
WEIGHT CAPACITY: 500 lbs.
Parts Listing
919-362-4765 (fax)
www.ofminc.com
161 Tradition Trail
.
Holly Springs, NC, 27540
800-520-7471 (voice)
.
919-303-6389 (voice)
.
[email protected]
12.12.2014
STOP
A
Chair
1 Unit
Assembly Instructions
No Tools Required
B
Legs
4 Units
A
B
B
Step 1: Attach the Legs (B) to the Chair (A) by
carefully laying the Chair (A) onto its
back and screwing the Legs (B) into the
corresponding holes in each corner of the
bottom of the chair frame and tighten by hand.
Step 2: Return Chair (A) to upright position.
Models 5000LE & 5000RE
Do This Before Step 1:
Carefully lay Chair (A) onto its back and pull
open corner of lining attached with velcro on
bottom of Chair (A). Pull out electrical cord and
reattach velcro. Plug-in electrical cord or stash
cord away in pocket after Legs (B) are attached
(see Step 1).