OFM CLT30SQ - Manual

Assembly Notes:
During assembly, hand tighten screw only when all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this table as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Model CLT24RD / CLT24SQ / CLT30RD / CLT30SQ
Café Height Table
919-362-4765 (fax)
www.ofminc.com
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
[email protected]
D
1 Unit
C
1 Unit
K
Table Top
1 Unit
H
Center Post
1 Unit
I
Top Support Plate
1 unit
J
Leg Supports
4 Units
F
Center Post Cap
1 Unit
G
Leveling Glides
4 Units
E
Leg Post Caps
4 Units
B
12 Units
A
2 Units
1
1
2
I
A
H
J
E
G
B
J
F
H 1
Assembly Instructions
Please read all instructions before assembly.
Step 1a: Attach Leg Supports (J) to Center Post (H) with Screws (B),
using small Allen Wrench (C).
Step 1b:
Attach Center Post Cap (F) to bottom of Center Post (H).
Step 1c: Attach Leg Post Cap (E) and Leveling Glides (G) to
Leg Supports (J).
Step 2:
Attach Table Top Support Plate (I) to Center Post (H) with
long Screws (A), using long Allen Wrench (D).
Step 3: Attach Table Top Support Plate to bottom of Table Top (K)
with short Screws (B), using short Allen Wrench (C).
B H
I
K
3
Parts Listing
03.24.2010