Canon VB-C10R - Manual (Page 45)

3-15
Setup Pr
ocedures
Detail Settings
Preset Settings Page
Use this page to specify the settings for preset camera positions provided to viewers.
Using VB Administration Tools is a convenient way to set presets (
→ P.4-17).
Presets 1-8
Up to 8 presets can be specified.
“Application”
Use these options to specify whether this preset can be used
only for picture recording (
→ P.3-16) or is also made available
in WebView Livescope Viewer. If it is also provided in
WebView Livescope Viewer, always specify the preset name.
“Preset Name”
Enter a name consisting of up to 15 alphanumeric
characters.
“Camera Parameter”
Enter the center angle between the angles you want to set
for Pan and Tilt. Enter the viewing angle for zoom.
“Pan”
Sets the pan position for the camera.
“Tilt”
Sets the tilt position for the camera.
“Zoom”
Sets the value for the camera’s angle of zoom.
“Brightness”
Sets the target value for the camera’s auto exposure
feature. Select “Brighter” if the picture is darker due to
backlight or other factor.
Note
Changes in presets are not applied in the viewer while it is connected.
Common Settings
“Restrict Camera Control to Presets”
VB-C10/VB-C10R camera control using Helper Viewer and
Java Viewer can be restricted to the preset angle only.
Click the “OK” button to change the settings. To discard the changes, click the “Cancel”
button. This returns you to the settings title page.
Tip
Presets can be set visually and more easily from the VB Administration Tools. Please
use the VB Administration Tools for making settings (
→ P.4-17).