Canon VB-C10R - Manual (Page 51)

3-21
Setup Pr
ocedures
Detail Settings
Miscellaneous Settings Page
Use this page to specify various other settings.
HTTP Server
“HTTP Port”
Sets the TCP port number for the HTTP. Enter an integer
between 1 and 65535. The default setting is No. 80.
“Global Address for Web Pages”
If a private address has been set in the VB-C10/VB-C10R
and you want to use the router’s NAT function to have a
fixed global address assigned to the VB-C10/VB-C10R
(
→ P.5-26), enter a global address here so that you can
view the sample pages ( → P.5-6).
Click the “OK” button to change the settings. To discard the changes, click the “Cancel”
button. This returns you to the settings title page.
Connection Keeping
“Send packet regularly”
When this is selected, an ICMP Echo packet is
transmitted periodically to a specified address in order
to maintain the network connection.
“Target IP Address”
Enter the IP Address of the host to which the packet is
to be sent.
“Interval (min.)”
Specify the packet transmission interval in minutes. Enter
an integer between 1 and 60.
Note
For the packet target address in the connection function, we recommend that you
consider the impact on traffic conditions and set the IP address that is nearest after
the auto dial-up router.
Internet
Router
VB-C10/VB-C10R
ISDN/leased line/
ADSL, etc
IP Installer
“Use IP Installer”
When this is selected, the VB-C10/VB-C10R’s IP address
can be set using the “VBIPI.exe” program contained on
the supplied CD-ROM.
In the factory default settings, this item is selected.