Setting view restrictions – Canon VB-C10R User Manual

Page 67

Advertising
background image

4-15

VB Administration

T

ools

Setting View Restrictions

View Restrictions can be set in one of two ways. Use the method that suits your environment or

taste.

1: Retrieving values from Admin Viewer and changing settings

○ ○ ○ ○ ○ ○

To Make Settings...

Start up Admin Viewer and set the view restriction from the shooting angle of the VB-C10/

VB-C10R.

1 Select the “Apply the View Restriction”.

Click the “Admin Viewer” button to start it up.

View Restriction Tool

2 Use Admin Viewer to move the camera angle to

the position you want to set with the Upper,
Lower, Left, Right, Telephoto, and Wide-angle
values, then click the “Get Value” button for
each.

View restrictions set can be checked in the View Restriction
Values Entry box, or with the View Restriction Preview
frame. Set these values so that Upper > Lower, Left <
Right, and Telephoto <

= Wide-angle.

3 Click the “Send” button.

Check the Status List to be sure the values were sent
correctly. Then when the “Reflect set values” button is
clicked, the values will be reflected in the VB-C10/VB-C10R.

Advertising