Casio XJ-S35 - Manual (Page 50)

50
Wireless Function and Wireless Connection Software
The Data Projector has a built-in function named “Wireless”, which you can use to
configure Data Projector settings for wireless LAN connection with a computer, and perform
Data Projector operations (such as displaying connection information, switching computers
when there are multiple computers connected over a wireless LAN, etc.) after a connection
is established. Wireless starts up automatically whenever you connect a CASIO YW-2
wireless adapter to the Data Projector’s USB port.
Wireless Connection is software that runs on a Windows computer. It lets you configure
computer settings for wireless LAN connection with the Data Projector, and perform
computer operations (such as sending computer screen contents to the Data Projector)
after a connection is established. You can also use Wireless Connection to display the
“Web Setup” page for configuring advanced wireless LAN connection settings (see
“Advanced Wireless LAN Connection Settings” on page 65).
About Data Projection Connection Profiles
A setup for a wireless LAN connection is called a “connection profile”. There are two types
of connection profiles: “simple connections” and “manual connections”. The Data Projector
comes with a following connection profiles built in. You can use the Data Projector’s
Wireless function to switch the current connection profile. Since Wireless Connection is
already equipped with the same Simple Connection 1, 2, and 3 profiles as the Wireless
function, all you need do is select the same profiles with Wireless and Wireless connection
to establish a wireless LAN connection. Note, however, that this is true only when a
CASIO YW-2 wireless adapter is connected to the computer.
About the Data Projector’s Wireless LAN
Connection
Profile Initial Profile
Name
Description
Simple
Connection 1
–
These profiles mainly are for establishing a simple connection
between the Data Projector and a single computer with a
CASIO YW-2 wireless adapter. The settings of these profiles
are fixed and cannot be changed.
Simple
Connection 2
–
Simple
Connection 3
–
Manual
Connection 1
Sample 1 These profiles mainly are for wireless LAN connection of
multiple computers to the Data Projector at the same time.
The initial default setup of each profile can be used to
configure a wireless LAN connection, or you can modify the
settings of a profile to improve security and save the profile
under a new name.
Manual
Connection 2
Sample 2
Manual
Connection 3
Sample 3