Casio XJ-S35 - Manual (Page 72)

72
Configuring a Connection Keyword
A connection keyword protects the Data Projector against unauthorized access when there
are multiple computers connected over a wireless LAN using a manual connection profile.
You can specify whether or not input of the connection keyword is required (connection
keyword on/off) to establish a wireless LAN connection with the Data Projector from a
computer, and you can register and modify the connection keyword as required.
You can turn the connection keyword on or off using either Web Setup or the Wireless
setup menu. Connection keyword registration and modification can be performed using Web
Setup.
To modify an existing connection keyword
1 Perform the procedure under “To display and log into the Web Setup page”
(page 65) to display the Web Setup top page.
2 In the “Projector Setup” area, click the [Edit] button.
z This will display a projector setup page.
3 Enter up to 16 single-byte characters or symbols into the “Connection Keyword”
box.
4 Select “On” when you want to require input for connection from a computer to
the Data Projector over a wireless LAN, or “Off” to turn off the connection
keyword.
5 After the settings are the way you want, click the [Save] button.
To turn connection keyword input on or off on the Data Projector
1 While Wireless is shown in the projection area, press the [MENU] key on the
Data Projector’s remote controller.
z This will display the setup menu.
2 Press the [
T] key to move the highlighting to “USB” and then press the
[ENTER] key.
3 Press the [
T] key once to move the highlighting to “Setup” and then press the
[ENTER] key.
z This will display the Wireless setup menu with “Connection Keyword” highlighted.