Casio XJ-S35 User Manual

Page 55

Advertising
background image

55

Note

A message like “Wireless Connection.exe is trying to access the Internet” may appear
when the computer you are using has security software installed. If this happens, select
“Always allow (access)” on the dialog box.

7

To terminate Wireless Connection operation, click the [×] button in the upper
right corner of the Wireless Connection window or select [Exit] on the
[Connection] menu.

z This will close the Wireless Connection window and terminate the connection between the

computer and Data Projector. At this time, the projected image will return to the
message in step 2 of this procedure.

Important!

The above procedure will not establish a wireless LAN connection if the connection
profile of the Data Projector is different from the profile used the first time a connection
was established between the computer and Data Projector (Simple Connection 1 in this
example). In this case, press the Data Projector’s remote controller [

…] key to display

the “Connection Profile” menu and then select the original connection profile (Simple
Connection 1 for this example). For details, see “To switch the Data Projector
connection profile”
(page 69).

Establishing a Wireless LAN Connection with Multiple
Computers Using a Manual Connection

This section explains how to connect up to four computers to a single Data Projector (over
a wireless LAN access point) at the same time. The following are the general steps that
are required.

1

Prepare for wireless LAN connection of the Data Projector and the computers (below).

2

Create connection profiles for the computers (page 56).

3

Use the Manual Connection profile to establish a wireless LAN connection between the
first computer and the Data Projector (page 58).

4

Use the Manual Connection profile to establish a wireless LAN connection between the
other computers and the Data Projector (page 63).

1

To prepare for wireless LAN connection of the Data Projector and the

computers

1

Install Wireless Connection on all of the computers.

2

Connect YW-2 wireless adapters to the USB port of each of the computers.

Advertising