Casio XJ-S35 - Manual (Page 63)

63
4 To use the Manual Connection profile to establish a wireless LAN
connection between the other computers and the Data Projector
Note
Perform the following steps after finishing the procedures under “ 2 To create connection
profiles for the computers” (page 56) and “ 3 To use the Manual Connection profile to
establish a wireless LAN connection between the first computer and the Data Projector”
(page 58).
1 On the connection profile switching dialog box for each of the other computers,
click the “Profile Name” down arrow button and then select “Test” from the
menu that appears.
2 Click the [Close] button.
z This will cause the dialog box shown below to appear.
z When the computer finds the Data Projector, the display will change to a dialog box like
the one shown below for selecting the connected device.
3 Move the highlighting to the XJ-S35 Data Projector to which you want to
connect and then click the [OK] button.
z The computer will connect with the Data Projector and the above dialog box will close.
Confirm that the “ Connection Profile ” setting for the connected device information on the
Wireless Connection window shows “ Manual Connection 1 (Test) ” .