Canon PC1270D - Manual (Page 24)

3-6
❚ To Change a Coded Speed Dialling Entry:
4 Press Function , then Clear to delete the previous entry, then re-enter the
fax/telephone number.
• If you do not want to change the fax/telephone number, ignore this step.
• Press
Space to enter a space and move the cursor to the next digit. Spaces are
optional and are ignored during dialling.
• Press Redial/Pause to enter a pause.
• If you make a mistake, move the cursor to the last number by pressing (–) , and
press Delete repeatedly to delete the numbers one by one starting from the last
number. Or, press Clear to delete all the numbers you have entered.
5 Press OK twice.
6 Press Function , then Clear to delete the previous entry, then re-enter the
name.
• If you do not want to change the name, ignore this step.
• If you are unsure how to enter characters,
→
p. 2-1.
7 Press OK .
8 Press Stop/Reset to return to standby display.
❚ To Delete a Coded Speed Dialling Entry:
4 Press Function , then Clear to delete the fax/telephone number.
5 Press OK .
6 Press Stop/Reset to return to standby display.
• The registered name is automatically cleared when you clear the fax/telephone
number.
Ex:
TEL NUMBER ENTRY
TEL=81 773 3173_
▲
TEL NUMBER ENTRY
DATA ENTRY OK
CODED SPD DIAL
2.NAME
Ex:
:A
Canon UC_
Ex:
:A
Canon UK
:A
DATA ENTRY OK
CODED SPD DIAL
3.OPTIONAL SETTING
TEL NUMBER ENTRY
TEL=
TEL NUMBER ENTRY
ERASING END
CODED SPD DIAL
2.NAME
03_EN.fm Page 6 Tuesday, February 19, 2002 8:21 AM