Canon PC1270D - Manual (Page 25)

3-7
3
Spe
ed Dia
lli
ng
Group Dialling
■ Creating Groups
• The Function key will light up by pressing Function to be able to operate Clear .
1 Press Additional Functions .
2 Use (–) or (+) to select 4.ADD. REGISTRATION .
3 Press OK .
4 Use (–) or (+) to select 3.GROUP DIAL .
5 Press OK .
6 Select a one-touch speed dialling key or coded speed dialling code under
which you want to register the group.
• If you wish to register a group under the already registered one-touch speed dialling
key or coded speed dialling code, or you want to re-enter a group, you must delete
the previous information first. (
→ pp. 3-3, 3-5, 3-6)
• Do not register a group under a one-touch speed dialling key or coded speed
dialling code, in which SUBADDRESS TX or POLLING RX has been set. If you
do so, you cannot send faxes to the other party’s which have a subaddress
registered.
❚ To register a group under a one-touch speed dialling key:
Use (–) or (+) to select the key under which you want to register the
group (01 to 12).
• If a one-touch speed dialling key has already been registered, 1-TOUCH SPD
DIAL or GROUP DIAL appears.
• If the fax functions have been programmed into the keys marked 01 to 12 using
PROG 1-TOUCH KEY in the Additional Functions, PROG 1-TOUCH KEY will
appear.
❚ To register a group under a coded speed dialling code:
Press Coded Dial , then use the numeric keys to enter the code under
which you want to register the group (00 to 99).
• If a coded speed dialling code has already been registered, CODED SPD DIAL
or GROUP DIAL appears.
7 Press OK twice.
ADDITIONAL FUNCTIONS
4.ADD. REGISTRATION
▲ ▼
ADD. REGISTRATION
1.1-TOUCH SPD DIAL
ADD. REGISTRATION
3.GROUP DIAL
▲ ▼
Ex:
GROUP DIAL
01=1-TOUCH SPD DIAL
Ex:
GROUP DIAL
03=
▲ ▼
Ex:
GROUP DIAL
21=
GROUP DIAL
1.TEL NUMBER ENTRY
TEL=
SB_PC1270D_FG_EN.book Page 7 Monday, February 18, 2002 12:20 PM