Canon PC1270D - Manual (Page 38)

4-6
■ Using the Platen Glass
• When documents are loaded in the ADF, the machine will scan them. You need to remove documents from the ADF in advance, in
order to fax from the platen glass.
• You can operate Book Sending , Delete or Clear when the Function key is lit. If the Function key is not lit, press it. However,
you do not need to press Function in step 3 to execute the Book Sending function if BOOK SENDING is programmed in PROGRAM
1-TOUCH KEY . ( → p. 9-4)
1 Press FAX to set to Fax Mode.
2 Prepare the document and place it face down on the platen glass. (
→
Reference Guide)
• To adjust the resolution,
→
p. 4-1.
• To adjust the contrast,
→
p. 9-4.
3 Press Function .
4 Press Book Sending .
5 Press (–) or (+) to select the document size.
6 Press OK .
7 Dial the other party’s fax number.
• For dialling methods,
→
p. 4-2.
• If you enter the wrong number, press Delete to delete the last number or press
Clear to delete all the numbers you entered, then enter the correct number.
• If you must first dial a digit to get an outside line (“9”, for example), add a pause
after that digit by pressing Redial/Pause .
8 Press Start to begin scanning.
9 Set the next document on the platen glass and press Start to begin
scanning.
• Repeat for other documents.
10 After all the documents have been scanned, press OK to begin sending.
• To cancel sending after dialling has started, press Stop/Reset then press (–) .
(
→
p. 4-7)
• You can scan up to approximately 79 pages* of different documents for memory
sending.
* Based on Canon FAX Standard Chart No. 1, standard mode.
• The Function key will light up by pressing Function to be able to operate
Delete or Clear .
Ex:
FAX 03/12 2001 15:30
FaxTel
STANDARD
Ex:
BOOK TX SCAN SIZE
A4
▲ ▼
Ex:
TEL= 9057951111
NEXT PAGE :[START]
FINISH SCAN :[OK]
▲
SB_PC1270D_FG_EN.book Page 6 Monday, February 18, 2002 12:20 PM