Casio FX-9750GII - Manual (Page 310)

13-7
k Exchanging Data with another Model Calculator
In this section, the term “OS 2.0 calculators” refers to the following models.
• fx-9860G II SD, fx-9860G II , fx-9860G AU PLUS, fx-9750G II , fx-7400G II
• fx-9860G SD, fx-9860G and fx-9860G AU whose operating systems have been updated to
Version 2.0
An OS 2.0 calculator supports data exchange with the following calculator models.
OS 2.0 calculators, fx-9860G series, fx-7400G series, CFX-9850G series
When you perform a data exchange operation with the above calculator models, the OS 2.0
calculator will decide whether or not specific data can be sent or received, and convert data as
required. The following describes the basic operations that are performed when exchanging
data between an OS 2.0 calculator and another model calculator.
• Sending data from the OS 2.0 calculator to another calculator model
Data that is supported by the OS 2.0 calculator but is not supported by the receiving model
either is not sent or is converted to a format supported by the receiving model before it is
sent.
• Sending data from another calculator model to an OS 2.0 calculator
Basically, data sent from another calculator model is received as it is. However, when there
is a difference between an OS 2.0 calculator function and the function of the sending model,
the OS 2.0 calculator will convert the data as required.
The following provides details about data compatibility between an OS 2.0 calculator and other
calculator models.
u Transferring Data between the fx-9860G
II SD, fx-9860G II , fx-9860G AU
PLUS, fx-9750G II , fx-9860G SD (OS 2.0), fx-9860G (OS 2.0), fx-9860G AU
(OS 2.0) and fx-7400G II
Sender: fx-7400G II
Receiver: fx-9860G II SD, fx-9860G II , fx-9860G AU PLUS, fx-9860G SD (OS 2.0),
fx-9860G (OS 2.0), fx-9860G AU (OS 2.0)
All data transferred.
Sender: fx-9860G II SD, fx-9860G II , fx-9860G AU PLUS, fx-9860G SD (OS 2.0),
fx-9860G (OS 2.0), fx-9860G AU (OS 2.0)
Receiver: fx-7400G II
• The following data is not sent from the fx-9860G II SD, fx-9860G II , fx-9860G AU PLUS,
fx-9860G SD (OS 2.0), fx-9860G (OS 2.0), fx-9860G AU (OS 2.0) or is disregarded when
received by the fx-7400G
II .
- CONICS mode data
- DYNA mode data
- E-CON2 mode data
- Matrix data
- RECUR mode data
- TVM mode data
- STAT mode function and variable data for which there is no corresponding function for
variable on the fx-7400G II (Example: Ƶ 2 GOF Test calculation result data, etc.)