Factory service, Warranty & service – PS Engineering PMA8000BT NUI Pilot’s Guide User Manual

Page 20

Advertising
background image

Page 20

202-890-0702

PMA8000BT Pilot Guide Rev. 8

PS Engineering, Inc. 2014 ©

Copyright Notice

Copyrighted information in this manual is subject to change without notice. PS Engineering reserves the right to
improve or change the products or contents of this manual, without notification of any person or agency. The
contents of this pilot’s guide may be downloaded, stored and reprinted for personal use provided that this
copyright information is included. Commercial use is strictly prohibited. For further information contact the
Publications Manager at PS Engineering, Inc., 9800 Martel Road, Lenoir City, TN 37772. Phone (865) 988-9800

Warranty & Service

In order for the factory warranty to be valid, the installations in a certified aircraft must be ac-
complished by an FAA-(or other ICAO agency) certified avionics shop and authorized PS Engi-
neering dealer. If the unit is being installed by a non-certified individual in an experimental
aircraft, a factory-made intercom harness must be used for the warranty to be valid.

PS Engineering, Inc. warrants this product to be free from defect in material and
workmanship for a period of three (3) years from the date of retail sale

by authorized

PS Engineering dealer. During the first twelve (12) months of the three-year warranty period,
PS Engineering, Inc., at its option, will send a replacement unit at our expense if the unit should
be determined to be defective after consultation with a factory technician. For the remaining
twenty-four (24) months of the three-year warranty period, PS Engineering will send a no-cost
replacement unit at customer shipping expense.

All transportation charges for returning the defective units are the responsibility of the pur-
chaser. All domestic transportation charges for returning the exchange or repaired unit to the
purchaser will be borne by PS Engineering, Inc. The risk of loss or damage to the product is
borne by the party making the shipment, unless the purchaser requests a specific method of
shipment. In this case, the purchaser assumes the risk of loss.

This warranty is not transferable. Any implied warranties expire at the expiration date of this
warranty. PS Engineering SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES. This warranty does not cover a defect that has resulted from improper han-
dling, storage or preservation, or unreasonable use or maintenance as determined by us. This
warranty is void if there is any attempt to dissemble this product without factory authorization.
This warranty gives you specific legal rights, and you may also have other rights, which may
vary from state to state. Some states do not allow the exclusion of limitation of incidental or
consequential damages, so the above limitation or exclusions may not apply to you.

All items repaired or replaced under this warranty are warranted for the remainder of the origi-
nal warranty period. PS Engineering, Inc. reserves the rights to make modifications or improve-
ments to the product without obligation to perform like modifications or improvements to previ-
ously manufactured products.

Factory Service

The units are covered by a three-year limited warranty. See warranty information. Call PS Engi-
neering, Inc. at (865) 988-9800 before you return any unit. This will allow the service technician
to provide any other suggestions for identifying the problem and recommend possible solutions.

After discussing the problem with the technician and you obtain a
Return Authorization Number, ship product to:
PS Engineering, Inc.
Attn: Service Department
9800 Martel Rd.
Lenoir City, TN 37772

(865) 988-9800

FAX (865) 988-6619

Email: [email protected]
Units that arrive without an RMA number, or telephone
number for a responsible contact, will be returned un-
repaired. PS Engineering is not responsible for items sent
via US Mail.

Advertising