PS Engineering PMA8000BT NUI Pilot’s Guide - Manual (Page 8)

Page 8 202-890-0702 PMA8000BT Pilot Guide Rev. 8
its presence and attempt to pair. Pairing will only occur when
both devices agree, so you will have to accept the pairing on your
device.
Connection — this occurs when Bluetooth devices that have
been previously paired see each other again and reestablish their
communication. This can happen automatically, or by prompting
the user to accept the connection again. The PMA8000BT will
always look for paired devices when it is turned on, and connect
with the first one that allows connection.
2.What access code do I use?
a. If your phone requires an access code to complete the pairing,
you can use 0000 (all zeros). See the table if you wish to
change the audio panels access code to “1234,” or “1111”.
3. How many devices can I pair with the audio panel?
a. You can pair up to eight devices. After that, the audio panel
will “forget” one device when another is added. Due to the
nature Bluetooth, we can’t predict which device will be
dropped. If your desired device is dropped, simply re-pair the
one you want.
4. How many devices can I use at the same time?
a. You can connect multiple devices such as a Smartphone and an
iPad for music, but only one telephone can be connected to the
audio panel at a time.
6. Can I use a different music source other than my phone?
a. Yes, you can. However the music device, must be paired and
connected first, before the telephone is turned on. In Smart-
phone such as Motorola Droid, you should specifically disable
the Bluetooth phone or music portion, depending on function to
be used. Note, if an iPhone is connected second, you may not
be able to stop it from taking over the music. Some phones
must manually select the PMA8000BT as an audio source for
the phone after the music is connected.
Hold button on power up Pairing Code
Nav 1 0000 (default)
Nav 2 1234
MKR 1111