PS Engineering PMA8000BT NUI Pilot’s Guide - Manual (Page 7)

202-890-0702 Page 7 Sept. 2014 PMA8000BT Pilot Guide
Quick reference PMA8000BT Operation
This pull-out section covers advanced operation of the PMA8000BT.
Bluetooth Connection
1. Turn on the PMA8000BT.
2. From your Bluetooth enabled device, search for other devices,
and select the PMA8000BT.
3. If an access code is required, enter “0000” to connect to the
PMA8000BT, unless this is changed (see FAQ #2)
You can now make and receive calls with the audio directed through
the audio panel, and stream music to Music input 1.
In addition, you can control music from some compatible devices.
See FAQ#7
Play/Pause, Skip Back, Skip Forward
Note: Not all entertainment control functions are supported
by all devices. Visit www.ps-engineering.com for up-to
-date information
The Bluetooth module can be turned off, of desired, by pushing the
AUX and ADF buttons while the unit is being turned on. The module
will reset when unit power is cycled.
Bluetooth® FAQ
1. Some Bluetooth terms to know:
Hands Free — audio panel acts as a hands free telephone hand-
set
A/V Controller — the audio panel has some control over the
music streaming device (see FAQ #7).
Stereo headset — the audio panel will receive music audio
streaming from the PMA8000BT.
Pairing — is when two Bluetooth devices establish communica-
tion and “agree” to connect. This occurs the first time the devices
“meet” and they will store the information to reconnect easily in
the future.
Discoverable — the PMA8000BT is always “discoverable.” That
means it will allow any Bluetooth device within range to detect