PS Engineering PMA8000BT NUI Pilot’s Guide - Manual (Page 9)

202-890-0702 Page 9 Sept. 2014 PMA8000BT Pilot Guide
7. What functions are available for music control?
a. Every Bluetooth device has a little different capability. The
table below shows functions we have determined through per-
sonal testing. Please understand that these devices can change,
and even if a function has or has not worked in the past, dy-
namic software upgrades can change the way your device be-
haves without notice, and beyond our control.
To use these features, push the TEL button and push the Play/
Pause (Nav 1), Skip Forward (NAV 2) or skip Backward
(MKR) button
8. What functions are available for phone features?
a. Every Bluetooth telephone has a little different capability. The
table below shows functions we have enabled for compatible
phones. The speed dial will activate the numbers stored in the
location in a phone, and not in the PMA8000BT. Please un-
derstand that these devices can change.
You must be in TEL mode to activate the telephone functions
Then press the button listed for more than one second, until the
telephone responds.
10. My Smartphone didn’t reconnect, what do I do?
It is possibly due to corruption of the stored information.
To reset the Bluetooth, turn the unit off. Put the pilot side
headset on. Hold down NAV2 and MKR switches at the same
time, and turn on the audio panel, continuing to hold both
switches for about 5 seconds, or until there is a "ding" sound
in headset. This clears all paired Bluetooth devices.
Button press Result
Nav 1 Speed dial 1(often this is voice mail)
Nav 2 Speed dial 2
MKR Last number dialed
Device Play Pause Skip Forward Skip Back
TEL+ Nav 1 Nav 1 Nav 2 MKR