Instrument cluster descriptions – Ram Trucks 2014 ProMaster Commercial - Owner Manual User Manual

Page 126

Advertising
background image

INSTRUMENT CLUSTER DESCRIPTIONS

1. Speedometer

The speedometer shows the vehicle speed in miles per
hour (mph) and/or kilometers per hour (km/h).

2. Turn Signal Indicators

The arrow will flash with the exterior turn
signal when the turn signal lever is operated.

NOTE:

• A continuous chime will sound if the vehicle is

driven more than 1 mile (1.6 km) with either turn
signal on.

• Check for an inoperative outside light bulb if either

indicator remains on and does not flash, or flashes at
a rapid rate.

3. Stop Light Failure Indicator

This light will illuminate if one or more of the stop light
bulb fails.

The failure relating to this light could be: one or more
blown bulbs, a blown protection fuse or a break in the
electrical connection.

4. Front Fog Light Indicator — If Equipped

This indicator will illuminate when the front
fog lights are on.

5. High Beam Indicator

This light shows that the high beam headlights
are on. Pull the multifunction lever toward you
to switch the headlights to high beam. Pull the

lever a second time to switch the headlights back to low
beam.

124

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising