Lap/shoulder belt operating instructions – Ram Trucks 2014 ProMaster Commercial - Owner Manual User Manual

Page 32

Advertising
background image

WARNING! (Continued)

Wearing a seat belt incorrectly is dangerous. Seat belts

are designed to go around the large bones of your
body. These are the strongest parts of your body and
take the forces of a collision the best. Wearing your
belt in the wrong place could make your injuries in a
collision much worse. You might suffer internal inju-
ries, or you could even slide out of part of the belt.
Follow these instructions to wear your seat belt safely
and to keep your passengers safe, too.

Two people should never be belted into a single

seat belt. People belted together can crash into one
another in a collision, hurting one another badly.
Never use a lap/shoulder belt or a lap belt for more
than one person, no matter what their size.

Lap/Shoulder Belt Operating Instructions
1. Enter the vehicle and close the door. Sit back and

adjust the seat.

2. The seat belt latch plate is above the back of the front

seat, next to your arm. Grasp the latch plate and pull
out the belt. Slide the latch plate up the webbing as far
as necessary to allow the belt to go around your lap.

Latch Plate

30

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising