Ram Trucks 2014 ProMaster Commercial - Owner Manual - Manual (Page 158)

Setup Menu
You can use the Setup menu to change the various factory
settings to suit your own preferences.
Press MENU to activate the Maximum Volume function.
Repeatedly pressing this button will activate the other
functions in the following sequence: Maximum Volume
(MVOL)
Auto Switch (AUTO) Beep (BEEP)
Set Clock (SEG 00:00) Maximum Volume
(MVOL). If this button or the button for adjusting the
selected function is not pressed for five seconds or if
the ROTARY knob is pressed, the display returns to
the previous view and the changes will be saved.
Maximum Volume
This function allows you to set the maximum permissible
volume. Turn the ROTARY knob to set the volume. The
display will show a message in the format
ЉMVOL 26Љ
indicating the maximum volume selected. When the
maximum volume selected is the maximum radio vol-
ume, the display will show
ЉMVOL OFFЉ.
Auto Switch
This function changes the on/off sequence of the radio as
described in the section:
ЉTurning the device on and off.Љ
To enable it, turn the ROTARY knob clockwise. The
display will show
ЉAUTO ONЉ. To disable it, turn the
ROTARY knob counterclockwise and the display will
show
ЉAUTO OFFЉ.
Beep
With this feature is enabled, the radio will emit a beep
when any knob is activated.
Clock settings
When you select this function, the display will show the
clock. To select the field to be set, press
or . Turn
the ROTARY knob to adjust the selected field.
156 UNDERSTANDING YOUR INSTRUMENT PANEL