Remote starting system, How to use remote start – Ram Trucks 2015 Chassis Cab Commercial - Diesel Supplement User Manual

Page 14

Advertising
background image

REMOTE STARTING SYSTEM

This system uses the Remote Keyless Entry

(RKE) transmitter to start the engine conve-

niently from outside the vehicle while still

maintaining security. The system has a range of

approximately 300 ft (91 m).
NOTE:
• The vehicle must be equipped with an automatic

transmission to be equipped with Remote Start.

• Obstructions between the vehicle and the RKE trans-

mitter may reduce this range.

• The Remote Start system will wait for the “Wait To

Start” amber telltale to extinguish before cranking the

engine. This allows time for the engine pre-heat cycle

to pre-heat the cylinder air, and is normal in cold

weather. Refer to “Electronic Vehicle Information Dis-

play (EVIC)” in “Understanding Your Instrument

Panel” for further information on the “Wait To Start”

amber telltale and the pre-heat cycle.

How To Use Remote Start

All of the following conditions must be met before the

engine will remote start:

• Shift lever in PARK
• Doors closed
• Hood closed
• HAZARD switch off
• BRAKE switch inactive (brake pedal not pressed)
• Battery at an acceptable charge level
• RKE PANIC button not pressed
• Fuel meets minimum requirement
• System not disabled from previous remote start event

12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising