Perform service indicator — cummins® diesel, Perform service indicator, Cummins® diesel – Ram Trucks 2015 Chassis Cab Commercial - Diesel Supplement User Manual

Page 332

Advertising
background image

NOTE:

Under no circumstances should oil change intervals

exceed 15,000 miles (24,000 km) or six months or
500 Hours, whichever comes first.

• Replace the engine oil and oil filter every 12,500 miles

(20 000 km) when running B20 fuel (Chassis Cab

Only).

If Chassis Cab models are operated with greater than

5% levels of Biodiesel, the oil change interval must not

exceed 12,500 miles (20 000 km) under any circumstances.

See the Fuel Requirements section for more information

regarding operation of Chassis Cab models configured

for use with Biodiesel blend (B6-B20) fuel meeting ASTM

specification D-7467.

Perform Service Indicator — Cummins® Diesel

Your vehicle will require emissions maintenance at a set

interval. To help remind you when this maintenance is

due, the Electronic Vehicle Information Center (EVIC) or

Driver information Display (DID) will display “Perform

Service”. When the “Perform Service” message is dis-

played on the EVIC/DID it is necessary to have the

emissions maintenance performed. Emissions mainte-

nance may include replacing the Closed Crankcase Ven-

tilation (CCV) filter element. The procedure for clearing

and resetting the “Perform Service” indicator message is

located in the appropriate Service Information.

330 MAINTENANCE SCHEDULE

Advertising