Engine break-in recommendations – Ram Trucks 2015 Chassis Cab Commercial - Diesel Supplement User Manual

Page 148

Advertising
background image

ENGINE BREAK-IN RECOMMENDATIONS

The Cummins® turbocharged diesel engine does not

require a break-in period due to its construction. Normal

operation is allowed, providing the following recommen-

dations are followed:
• Warm up the engine before placing it under load.
• Do not operate the engine at idle for prolonged periods.
• Use the appropriate transmission gear to prevent

engine lugging.

• Observe vehicle oil pressure and temperature indica-

tors.

• Check the coolant and oil levels frequently.
• Vary throttle position at highway speeds when carry-

ing or towing significant weight.

NOTE:

Light duty operation such as light trailer towing

or no load operation will extend the time before the

engine is at full efficiency. Reduced fuel economy and

power may be seen at this time.
For additional vehicle break-in requirements, refer to

“Trailer Towing” in “Starting And Operating” of the

Owners Manual.
Because of the construction of the Cummins® turbo-

charged diesel engine, engine run-in is enhanced by

loaded operating conditions which allow the engine

parts to achieve final finish and fit during the first

6,000 miles (10 000 km).

146 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising