Fuel requirements – Ram Trucks 2015 Chassis Cab Commercial - Diesel Supplement User Manual

Page 83

Advertising
background image

WARNING!

Remember to disconnect the cord before driving.
Damage to the 110–115 Volt electrical cord could
cause electrocution.

NOTE:

The block heater will require 110 Volts AC and

6.5 Amps to activate the heater element.

FUEL REQUIREMENTS

Use good quality diesel fuel from a reputable supplier in

your vehicle. Federal law requires that you must fuel this

vehicle with Ultra Low Sulfur Highway Diesel fuel (15

ppm Sulfur maximum) and prohibits the use of Low

Sulfur Highway Diesel fuel (500 ppm Sulfur maximum)

to avoid damage to the emissions control system.

For most year-round service, No. 2 diesel fuel meeting

ASTM (formerly known as the American Society for

Testing and Materials) specification D-975 Grade S15

will provide good performance. If the vehicle is exposed

to extreme cold (below 20°F or -7°C), or is required to

operate at colder-than-normal conditions for prolonged

periods, use climatized No. 2 diesel fuel or dilute the

No. 2 diesel fuel with 50% No. 1 diesel fuel. This will

provide better protection from fuel gelling or wax-

plugging of the fuel filters.

WARNING!

Do not use alcohol or gasoline as a fuel blending
agent. They can be unstable under certain conditions
and hazardous or explosive when mixed with diesel
fuel.

4

STARTING AND OPERATING 81

Advertising